[c-nsp] Bonding multiple 3G HWIC signals?

[Stephen Cobb]

I'm curious as to whether or not Cisco's 3G HWIC's can somehow be aggregated
(through IOS or not) in order to essentially get an Nx3G amount of bandwidth
over a single carrier's network...haven't found any luck googling.



Cisco says the only option is to use multiple carriers, if in the same
router (and I'm not sure whether or not to believe that):

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps7272/prod_qas0900aecd80600f5d.html



The application is for sending HD video over wireless, and we'd need at
least 3-4 3G signals to make this work.



Does anyone have experience with doing something like this with one single
router? (i.e. 2800 with multiple HWIC-3G-CDMA's)



OR...Is the only option to buy a few 1841's with one 3G HWIC in each, and
route everything back to our LAN?



Any advice is greatly appreciated!

sc

-- 
Stephen F. Cobb • Senior Sales Engineer
CCNA/CCDA/DCNID/ATSP
Telecoast Communications, LLC • Santa Barbara, CA
o 877.677.1182 x272 • c 760.807.0570 • f 805.618.1610
aim/yahoo telecoaststephen