[c-nsp] Strange ME3400 PPS Limit

[Jeremy Parr]

On 14 April 2010 11:57, Jeremy Parr <jeremyparr at gmail.com> wrote:
> I have an ME3400 running 12.2(46)SE that will not pass (much) more
> than 1000pps through its copper gig port. The interface counters hover
> around 1000pps tx/rx, while the bps rate fluctuates (presumable due to
> the variable packet sizes getting thrown at it). There are no service
> policys or rate limits applied to any of the interfaces. Any thoughts?
>
>  5 minute input rate 1681000 bits/sec, 879 packets/sec
>  5 minute output rate 7545000 bits/sec, 1012 packets/sec

I am also seeing the following in the logs....

%PLATFORM_UCAST-6-PREFIX:  One or more, more specific prefixes could
not be programmed into TCAM and are being covered by a less specific
prefix