[c-nsp] Good old Cisco 828 and HSRP

[Shimol Shah]

You need plus feature set for HSRP on 828.

On 4/19/10 9:50 AM, Sascha E. Pollok wrote:
> Hello people,
>
> I am currently configuring a quite old Cisco 828 G.SHDSL router.
> It is currently running 12.4(25b) IP. The feature navigator says
> it does support HSRP but obviously it does not as the
> CLI does not offer any "standby" command on Ethernet0.
>
> Does anyone have hands-on-expriences regarding 828+HSRP ?
>
> Thanks
> Sascha
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/