[c-nsp] Mixed SupV versions in the same 4500 chassis

[Daniska, Tomas]

Folks,

 

a colleauge of mine has to migrate one chassis from a single SupV-10GE
to a dual SupV-1GE scenario in a few minutes. On 6500, it's possible to
insert mixed supervisors into a chassis (provided that redundancy mode
is not SSO or similar), would this work for 4500 as a migration path as
well?

 

The datasheet says SupII, SupIV and SupV cannot be mixed in the same
chassis, but does not explicitly state on the SupV sub-variations.

 

 

 

Any quick hints appreciated

 

--

Tomas Daniska
Senior CSE/BDM

Soitron, a.s.
Plynarenska 5, 829 75 Bratislava, Slovakia
tel: +421 2 58224000, fax: +421 2 58224520

 

Good judgment comes from experience. Unfortunately, the experience
usually comes from poor judgment. 

-- O 'Reilly's fundamentals of Aviation