[c-nsp] CRS-1 Hardware

[Aaron]

Bad analogy since the CRS has a SIP-800.
The MSC is the routing engine. The PLIM is the physical interfaces only.

On Fri, Apr 23, 2010 at 02:15, Mikael Abrahamsson <swmike at swm.pp.se> wrote:

> On Fri, 23 Apr 2010, Pratap Reddy wrote:
>
>  Hi,
>>
>>
>> As per Cisco's documentation Multi Services Card should always be paired
>> with Interface Module.
>>
>> Does this mean for each Line card one Multi Service card is required at
>> the back of the chassis and Line card can not be used without it.
>>
>
> Yes, PLIM is brainless without MSC. Analogy from GSR is that the MSC is the
> SIP-601 and the PLIM is the SPA module.
>
> --
> Mikael Abrahamsson    email: swmike at swm.pp.se
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>