[c-nsp] traffic shape on 87x/88x/18xx SVI interfaces

[Arie Vayner (avayner)]

This kind of interfaces (FastEthernet) are actually Layer 2 switch ports
like you would usually find on LAN switches. Shaping on SVI interfaces
is usually not supported on this kind of platforms (Layer 2 switches),
so this is consistent.

You can still use shaping on "real" interfaces on the 800/1800/2800/3800
routers.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Shimol Shah
(shimshah)
Sent: Tuesday, April 27, 2010 18:28
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] traffic shape on 87x/88x/18xx SVI interfaces

Take a look at:


Switch Virtual Interface for Cisco Integrated Services Routers
==============================================================

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_white_pap
er0900aecd8064c9f4.html

Shimol


On 4/27/10 11:19 AM, Chris Flav wrote:
>
>
>> Hi,
>>
>> it's not working, have to use traffic policing instead of traffic
>> shaping on SVI. No way around that.
>
> How incredibly lame.  Hardware limitation?
>
> C.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/