[c-nsp] Problems with dot1q trunk over EoMPLS with WS-X6148-GE-TX

[Grzegorz Janoszka]

On 8-8-2010 13:02, Marco Matarazzo wrote:
> Router1
> 6506 w/VS-S720-10G IOS 12.2(33)SXI2
> Customer facing blade: WS-X6148-RJ-45

Hi,

Afair SXI2 has memory leaks, please check if you are affected by them.

> Router1##sh mpls l2 vc 71172104 det
> Local interface: Fa2/32 up, line protocol up, Ethernet up
>    Destination address: x.y.z.56, VC ID: 71172104, VC status: up
>      Output interface: Te5/5, imposed label stack {700}
>      Preferred path: not configured
>      Default path: active
>      Next hop: x.y.z.14
>    Create time: 03:32:35, last status change time: 03:32:35
>    Signaling protocol: LDP, peer x.y.z.56:0 up
>      Targeted Hello: x.y.z.40(LDP Id) ->  x.y.z.56
>      MPLS VC labels: local 969, remote 700
>      Group ID: local 0, remote 0
>      MTU: local 1500, remote 1500

If you are unable to rise MTU on fa2/32 (as well as on the other side) 
to 1998 or sth higher than 1500, then you cannot pass vlans and keep 
1500 MTU inside them.

-- 
Grzegorz Janoszka