[c-nsp] Cisco IPv6 doubt

[Harold Ritter]

Hi Jeferson,

If you do not have any IPv4 address configured on the box, you absolutely need to configure the router-id explicitly.

Regards

Le 2010-08-12 à 10:50, Jeferson Guardia a écrit :

> 
> Hi Group,
> 
> A doubt/curiosity, what happens in a router that you are setting up IGP's ,
> and you dont hardcode the router-id, thus
> it will look for an IPv4 address to use as a router-id, but what if I dont
> have any IPv4 address configured? Where will
> it come from?
> 
> Rgs,
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/