[c-nsp] App to manage pushing out changes

[James Kelty]

NCG? http://www.netomata.com/products/ncg

-James

On Fri, Aug 13, 2010 at 10:37 AM, john heasley <heas at shrubbery.net> wrote:

> Fri, Aug 13, 2010 at 10:19:20AM -0700, Eric Cables:
> > On Thu, Aug 12, 2010 at 12:42 PM, Brandon Ewing <nicotine at warningg.com
> >wrote:
> > > On Thu, Aug 12, 2010 at 01:24:24PM -0600, Saxon Jones wrote:
> > > > CiscoWorks LMS or even RANCID will work for this. On a box with
> RANCID
> > > > installed it's done like so:
> > > >
> > > > for host in router1 router2 router3; do clogin -c"config t;no ip
> > > > access list extended asdf;ip access list extended asdf permit any
> > > > any;end;write mem" ${host}; done
>
> also see share/cisco-load.exp in the rancid tar file as an example of
> doing this with clogin -s file.exp hostname [...].
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
James Kelty
Lead Network Engineer

"Clams are eeeeeeeeevil...."
- Maisie K. Age 3