[c-nsp] full duplex mismatch speed - dynamips

[Alessandro Braga]

Verify duplex and speed configurations on interface, the rule is:
autoXauto, forcedXforced. If problem not solve, disable cdp.

Att,
AB



2010/8/17 Jeferson Guardia <jefersonf at gmail.com>:
>  Guys,
>
> Anyone knows how to solve this on dynamips? (router with lan switch
> connection) - I thought that setting
> speed auto would solve it.
>
> R3#
> *Mar  1 00:12:08.323: %SYS-5-CONFIG_I: Configured from console by console
> *Mar  1 00:12:10.027: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed
> state t
> o up
> *Mar  1 00:12:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthern
> et0/0, changed state to up
> *Mar  1 00:12:23.527: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar  1 00:12:24.079: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar  1 00:12:26.295: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar  1 00:13:10.571: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> R3#
> R3#
> *Mar  1 00:13:59.455: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
>
>
> Rgs,
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>