[c-nsp] cisco-nsp Digest, Vol 93, Issue 56

[Yap Chin Hoong -]

Hi there,

   Kindly provide the output of the show run int fa0/0 on RT3. Thanks.

regards,
YapCH
http://itcertguides.blogspot.com/

> Date: Tue, 17 Aug 2010 23:03:44 -0300
> From: Jeferson Guardia 
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] full duplex mismatch speed - dynamips
> Message-ID:
> 
> Content-Type: text/plain; charset=ISO-8859-1
>
> Guys,
>
> Anyone knows how to solve this on dynamips? (router with lan switch
> connection) - I thought that setting
> speed auto would solve it.
>
> R3#
> *Mar 1 00:12:08.323: %SYS-5-CONFIG_I: Configured from console by console
> *Mar 1 00:12:10.027: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed
> state t
> o up
> *Mar 1 00:12:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthern
> et0/0, changed state to up
> *Mar 1 00:12:23.527: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar 1 00:12:24.079: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar 1 00:12:26.295: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> *Mar 1 00:13:10.571: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
> R3#
> R3#
> *Mar 1 00:13:59.455: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
> Fast
> Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
>
>
> Rgs,
>