[c-nsp] full duplex mismatch speed - dynamips

Jeferson Guardia jefersonf at gmail.com
Tue Aug 17 23:21:47 EDT 2010


why no one read the 'dynamis' word on the subject? this is a particular
issue being experienced on a 3725 being used as a switch on DYNAMIPS... it
just doesnt work...

2010/8/17 Justin M. Streiner <streiner at cluebyfour.org>

> On Tue, 17 Aug 2010, Alessandro Braga wrote:
>  Verify duplex and speed configurations on interface, the rule is:
>> autoXauto, forcedXforced. If problem not solve, disable cdp.
> Also, while auto speed/duplex negotiation is fine for user workstation/PC
> ports in most cases, I recommend against using it on your network
> infrastructure if you can help it.
> jms
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list