[c-nsp] incoming queue

[Peter Rathlev]

On Fri, 2010-08-20 at 15:39 -0400, P.A wrote:
> Yeah I have the same config, but don’t think that incoming packets
> will be mapped to the priority queue. I think all the config below is
> going to do is set the internal dscp with the policy to be used on the
> outgoing queue. From what I understand from the link below all
> incoming packets 1st are assigned to an incoming queue before anything
> else. So unless the packet already has a COS marking it will not use
> the priority queue. 

Ah, of course, I failed to actually read what you had wrote about the
queueing and focused on the DSCP trust. :-)

It seems you were right all along, incoming priority-queue on the 6500
can only work if packets arrive with 1p-bits, or if the card happens to
be a WS-X6708-10GE which has the "priority-queue dscp-map ..." command.

(The 6708 _is_ a sweet card regarding QoS, at least among LAN cards.)

-- 
Peter