[c-nsp] Juniper M20 to Cisco 2600 Multilink Frame Relay & FRF.16 issues

[Jim Lucas]

Ok, so I decided to try this on a 7200 running c7200-a3jk9s-mz.124-8d.bin

Cisco says that FRF.16 works on this IOS.

Here is how I have it configured

Router#show run
!
frame-relay switching
!
controller T1 3/0
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
controller T1 3/1
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
controller T1 3/2
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
controller T1 3/3
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
interface MFR0
 no ip address
 encapsulation frame-relay IETF
 frame-relay lmi-type ansi
!
interface MFR0.16 point-to-point
 frame-relay interface-dlci 16 IETF
!
interface MFR0.17 point-to-point
 frame-relay interface-dlci 17 IETF
!
interface Serial3/0:0
 no ip address
 encapsulation frame-relay MFR0
 no arp frame-relay
!
interface Serial3/1:0
 no ip address
 encapsulation frame-relay MFR0
 no arp frame-relay
!
interface Serial3/2:0
 no ip address
 encapsulation frame-relay MFR0
 no arp frame-relay
!
interface Serial3/3:0
 no ip address
 encapsulation frame-relay MFR0
 no arp frame-relay
!

Here is the results

Router#show int sum
  Interface              IHQ   IQD  OHQ   OQD  RXBS RXPS  TXBS TXPS TRTL
------------------------------------------------------------------------
  Serial3/0:0              0     0    0     0     0    0     0    0    0
  Serial3/1:0              0     0    0     0     0    0     0    0    0
  Serial3/2:0              0     0    0     0     0    0     0    0    0
  Serial3/3:0              0     0    0     0     0    0     0    0    0
  MFR0                     0     0    0     0     0    0     0    0    0
  MFR0.16                  -     -    -     -     -    -     -    -   -
  MFR0.17                  -     -    -     -     -    -     -    -   -


I have tried adding the "frame-relay intf-type nni" to the MFR0 int with no change.

Anybody have any thoughts they could share?  Thanks

For complete Juniper information, please view the following archive message.

	https://puck.nether.net/pipermail/cisco-nsp/2010-August/072713.html