[c-nsp] vs passdetect an ace4710

[Jason Giles]

Check your "passdetect count"  I bet its set to 3

Means you have to pass 3 probes to go back in service and since your pass detect is 60, you will pass when the service is available, pass again 60 seconds after, then 120 seconds later have your 3rd pass and you are back in service. 

Just a hunch.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Arne Larsen / Region Nordjylland
Sent: Monday, December 06, 2010 4:01 AM
To: 'cisco-nsp at puck.nether.net'
Subject: [c-nsp] vs passdetect an ace4710

Hi all.

Can someone help me out here.
I've got a ACE4710 that has an http probe for a service.
The interval is 15 and the passdetect i 60.
My problem is that it takes 120 sec before it gets active after a service shutdown.
Am I missing sothing here ??

/Arne

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/