[c-nsp] bandwidth threshold trap w/o filtering

[Mackinnon, Ian]

Cacti


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Adam Greene
> Sent: 10 December 2010 15:40
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] bandwidth threshold trap w/o filtering
> 
> Hi,
> 
> I'm trying to get alerted if bandwidth levels rise above a certain %
of
> interface capacity, on either a 7204VXR or a 2960S.
> 
> On the switch, I see the "storm-control" command is available, but
> apparently in addition to generating alerts, the command will cause
> traffic to be filtered when the threshold is exceeded. I don't want to
> filter traffic, just be alerted.
> 
> Any quick & easy suggestion for how to achieve this?
> 
> Thanks,
> Adam
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/