[c-nsp] 876 & Siemens DSLAM @ aDSL2+ ?

[Garry]

On 13.12.2010 13:59, David Rothera wrote:
> Could you run a 'sh dsl int at0' and paste the input. I have pretty much every single DSL firmware for the 877 including ones that drastically improve ADSL2 performance but I'm not too sure if the 876 takes the same firmware...

The 877 (which is for Annex-A) most likely uses a different DSL firmware
than 876 (Annex-B) ...

Init FW:         init_AMR-3.0.014_no_bist.bin
Operation FW:    AMR-3.0.014.bin
FW Source:       embedded
FW Version:      3.0.14

Tnx, Garry