[c-nsp] Outbound Load balancing using eBGP

[Andrew Koch]

On Wed, Dec 22, 2010 at 16:33, RAZ MUHAMMAD <raz.muhammad at gmail.com> wrote:
> Unfortunately the vendor does not support multipath or anything similar on
> their platform.

As you asked on a Cisco list, you got a response on what can be done
with Cisco equipment - use multipath.

You might try asking the vendor if they have any tricks.  Otherwise,
you should try looking for a user group mailing list for whatever
vendor that may be (it would be quite a bit more helpful to identify
what equipment you are using).  There are Alcatel, Extreme, Foundry,
Force10, HP, Huawei and Juniper mailing lists hosted on puck @
http://puck.nether.net/mailman/listinfo/  Possibly they can be of use,
being that the users of whatever type of equipment you are using are
in the same boat.

Good Luck,
Andrew Koch