[c-nsp] C3745 : L2VPN , MPLS not able to export netflow from P router
Jeff Wojciechowski
Jeff.Wojciechowski at midlandpaper.com
Thu Dec 30 10:02:38 EST 2010
Can you ping the collector from the router exporting Netflow data? If you have to specify the source to ping the collector you need to have set your flow-export source to the interface with that IP (not sure if you can specify the IP of the source interface)
This is what my working configs look like on a bunch of 2801s:
ip flow-cache timeout active 1
ip flow-export source FastEthernet0/0
ip flow-export version 9
ip flow-export template options export-stats
ip flow-export destination <IP ADDRESS OF COLLECTOR> 2055
-Jeff
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nitin Jain
Sent: Thursday, December 30, 2010 5:00 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] C3745 : L2VPN , MPLS not able to export netflow from P router
Hi ALL,
this is my first post to the group.
I am using 5 c3745 routers to make the topology as attached. I am able to telnet from site 1 to site 2 but not able to export netflow from P router.
can someone please help?
br/~Nitin
This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus.
More information about the cisco-nsp
mailing list