[c-nsp] Policer on c4503

[Mikisa Richard]

Hi all,

UPDATE:
Turned out the policer was fine. Just a small tweak on the ACL got it to 
work. Otherwise grateful for all the help

Richard

On 1/31/2010 6:39 PM, Doug McIntyre wrote:
> On Fri, Jan 29, 2010 at 10:42:27AM +0300, Mikisa Richard wrote:
>    
>> Hi all,
>>
>> Any ideas why the Policer policy below does not work. Intention is for
>> me to lock down traffic to 3Mbps both ways on interface g3/11.
>>
>> !!
>> class-map match-all ROKE-LIMIT
>>     match access-group name ROKE-SLAP
>> !
>> policy-map POLICY-ROKE
>>     class ROKE-LIMIT
>>    police 3000000 bps 30000 byte conform-action transmit exceed-action drop
>> !
>> interface GigabitEthernet3/11
>>    description link to ROKE
>>    no switchport
>>    ip address x.x.x.x
>>    service-policy input POLICY-ROKE
>>    service-policy output POLICY-ROKE
>>      
>
> Looks like the correct thing, assuming the access-group traffic is
> being matched.
>
> Do you have 'qos' enabled? Its off by default on the 4500.
>
> Just a simple 'qos' as a config option in this platform.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>