[c-nsp] WS-X6748-SFP input errors

[James Slepicka]

also, check sh queueing int gi1/9

James Slepicka wrote:
> sh int gi1/9 trans detail?
>
> Tim Durack wrote:
>> On Fri, Feb 5, 2010 at 11:07 AM, Jeff Kell <jeff-kell at utc.edu> wrote:
>>  
>>> On 2/5/2010 10:49 AM, Tim Durack wrote:
>>>    
>>>> On Fri, Feb 5, 2010 at 10:42 AM, Matlock, Kenneth L
>>>> <MatlockK at exempla.org> wrote:
>>>>
>>>>      
>>>>> Can you paste in the full 'show int', my guess is you're getting 
>>>>> input
>>>>> buffer failures (need to see the 'Input Queue' line in particular).
>>>>>
>>>>>         
>>> Input errors on LH fiber... try "show int g1/9 count err" and look for
>>> symbol errors.
>>>     
>>
>> Only Rcv-Err:
>>
>> sh int g1/9 counters errors
>>
>> Port            Align-Err    FCS-Err   Xmit-Err    Rcv-Err UnderSize 
>> OutDiscards
>> Gi1/9                   0          0          0      16840         
>> 0           0
>>
>> Port          Single-Col Multi-Col  Late-Col Excess-Col Carri-Sen
>> Runts      Giants
>> Gi1/9                  0         0         0          0         0
>>    0           0
>>
>> Port           SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err 
>> Symbol-Err
>> Gi1/9                    0           0            0            
>> 0          0
>>
>>   
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/