[c-nsp] "show stats" question

[Manu Chao]

Hello Nick,

AFAIK "show stats" command doesn't exist??

If you mean "show interfaces stats" command then you have following
description in CCO:

Chars In: Number of characters received in each switching mechanism
Chars Out: Number of characters sent out each switching mechanism

I assume we are speaking about ASCII character  (8 bits) but I am not 100%
sure :)

R/
Manu


On Mon, Feb 8, 2010 at 7:08 PM, Nick Griffin <nick.jon.griffin at gmail.com>wrote:

> Can anyone confirm the command below, the Chars/in/out reference, are the
> results listed in bytes? I'm unable to find this command documented
> anywhere
> on CCO to get a better description of the command and its output.
>
> The 6509 “show stats” command gives the following information:
>
> Vlan2
>  Switching path    Pkts In   Chars In   Pkts Out Chars Out
>  Processor     14342    1650437      2492     166010
>  Route cache       534      55212       149      11166
>  Distributed cache    7169590 6090148689    8831508 9040962158
> Total    7184466 6091854338    8834149 9041139334
>
> Thanks,
>
> Nick Griffin
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>