[c-nsp] SNMP process 45%

[Randy]

"sh proc cpu sorted" is your friend.
 
output will be *sorted* from most-snmp in this case to least.
Add up the utils of the first few and you will be able to account for the remaining 55%
--- On Fri, 2/12/10, mohamed attia <m_attia100100 at hotmail.com> wrote:


From: mohamed attia <m_attia100100 at hotmail.com>
Subject: [c-nsp] SNMP process 45%
To: cisco-nsp at puck.nether.net
Date: Friday, February 12, 2010, 8:17 PM





Hi,



can any one help me as i noticed that our cisco VXR 7200 have process 100% and after checking i detect that SNMP ENGINE only reach to 45%.




CPU utilization for five seconds: 99%/49%; one minute: 99%; five minutes: 99%
PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 
231     4428660   3798727       1165 46.12% 45.46% 44.28%   0 SNMP ENGINE      
  73   198346604 837505469        236  0.55%  0.52%  0.56%   0 IP Input         
245   278646264 832638396        334  0.47%  0.40%  0.40%   0 BGP Router 






Best Regards,
-----------------------------------
Eng. : Mohamed Attia
Tel: +2 010 2039799

  


                          
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/201469230/direct/01/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/