[c-nsp] ip igmp join-group x.x.x.x

[Artur]

for static join use

*ip igmp static-group*

for troubleshooting purposes use
*ip igmp join-group*
the router will answer to pings to the multicast group address



On 2/24/2010 10:35 AM, Marian Ďurkovič wrote:
> On Wed, Feb 24, 2010 at 01:52:37PM +0100, luismi wrote:
>    
>> Be aware of the command, I dont know the behaviour of your platform, but
>> in our 7206 npe-g2 we have issues with it. Multicast video and audio was
>> broken because the command makes the multicast to be "process
>> switched" , if my memory is ok.
>>      
> You need to use "ip igmp static-group ..." instead.
>
>      M.
>
>    
>> El lun, 22-02-2010 a las 22:40 +0000, Vladislav Vasilev escribió:
>>      
>>> Hello all,
>>>
>>> I thought that applying "ip igmp join-group 239.1.1.1" makes the interface
>>> under which is executed a member of 239.1.1.1 for as long as the command is
>>> there. The problem is that the switch (in this case ME3400) never sends
>>> another IGMP report and the multicast stream gets pruned. I guess it is a
>>> bug?
>>>
>>>
>>> Regards,
>>> V.Vasilev
>>>        
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/