[c-nsp] Ethernet Network

[My Name]

Andrey,

Is there a break down or analysis on why you are choosing 1546?
I assume the following;

1500 bytes max data + 22 max header + 4 CRC trailer + 4 byte 802.1q tag
+16 up to 4 labels = 1546?

Why not just enable jumbos and set it as high as possible?

mike

On Tue, Jan 12, 2010 at 6:55 AM, Andrey 'sshd' Petrenko <
andy.petrenko at gmail.com> wrote:

> Sorry, in mpls interfaces use mtu 1546
>
> 2010/1/11 Mohammad Khalil <eng_mssk at hotmail.com>
>
> >
> > hi all
> > we have wimax network , our network are all cisco Cisco 7606 , Cisco 6524
> > ME , Cisco 3750 ME
> > and we enabled MPLS in our network in order to provide MPLS service to
> our
> > customers (VPLS , L3VPN , EoMPLS)
> > what is the best MTU value that i can enable on my network either on
> > interface basis or on system basis
> >
> > Thanks in advance
> >
> > _________________________________________________________________
> > Windows Live: Keep your friends up to date with what you do online.
> >
> >
> http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>
>
> --
> With best regards,
>     Andrey 'sshd' Petrenko
>     xmmp: sshd at jabber.org
>     gtalk: andy.petrenko at gmail.com
>     skype: andy.petrenko
>     web: http://sshd.by
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>