[c-nsp] 6509-E with WS-X6148A-GE-45A

[Renelson Panosky]

sho diagnostic status

<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
<OD> - OnDemand Diagnostics, <SCH> - Scheduled Diagnostics

====== ================================= ===============================
======
Card   Description                       Current Running Test            Run
by
------ --------------------------------- -------------------------------
------
1      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

2      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

3      48-port 10/100/1000 RJ45 EtherMod TestNonDisruptiveLoopback
<HM>

4      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

5      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

6      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

7      Supervisor Engine 32 8GE (Active) N/A
N/A

8      48-port 10/100/1000 RJ45 EtherMod N/A
N/A

9      48 port 10/100/1000mb EtherModule N/A
N/A

====== ================================= ===============================
======


On Tue, Jan 12, 2010 at 2:57 PM, David Prall <dcp at dcptech.com> wrote:

> What does "sh diag" give you for the module.
>
> --
> http://dcp.dcptech.com
>
>
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > bounces at puck.nether.net] On Behalf Of Renelson Panosky
> > Sent: Tuesday, January 12, 2010 2:36 PM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] 6509-E with WS-X6148A-GE-45A
> >
> > Hello All
> >
> > How do I fix Minor Errors beside reseating the module, anybody knows
> >
> > Mod  Online Diag Status
> > ---- -------------------
> >   1  Pass
> >   2  Pass
> >   3  Pass
> >   4  Minor Error
> >   5  Pass
> >   6  Pass
> >   7  Pass
> >   8  Pass
> >   9  Minor Error
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>