[c-nsp] MPLS - CE to CE throughput

[jack daniels]

Thanks a lot for all replies they were very helpful to me .

Regards



On Tue, Jan 19, 2010 at 1:19 AM, Cyrill Malevanov <cm at n-home.ru> wrote:

> iperf is the perfect solution for both transmit and receive speed checks
>
> On Jan 18, 2010, at 7:57 PM, jack daniels wrote:
>
> > Hi guys,
> >
> > I want to check the throughout in scenario
> >
> > CE1-----MPLS cloud ----CE2
> >
> >
> > CE1 link is 2 Mbps
> > CE2 link is 2Mbps
> >
> > If CE1 pumps 2Mbps then want to check if CE2 recieves it.
> > Is there any s/w to genrate traffic at CE1 ?  OR any other method ?
> >
> >
> > Regards
>  > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>