[c-nsp] OSPFv3 as PE-CE protocol for 6VPE on IOS-XR ?

[Minzhi (Catherine) Wu]

Only BGP and Static are supported for 6VPE per Cisco.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sridhar
Sent: Tuesday, January 19, 2010 2:30 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] OSPFv3 as PE-CE protocol for 6VPE on IOS-XR ?

Hello!

Is OSPFv3 supported as a PE-CE protocol for 6VPE on IOS-XR? The Cisco
IOS-XR MPLS config guide only specifies BGP as the PE-CE protocol, and
I haven't been able to configure a VRF under OSPFv3.

thanks
sridhar
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

This message contains confidential information and is intended only for the individual named.  If you are not the named addressee, you are notified that reviewing, disseminating, disclosing, copying or distributing this e-mail is strictly prohibited.  Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any loss or damage caused by viruses or errors or omissions in the contents of this message, which arise as a result of e-mail transmission. [FriendFinder Networks, Inc., 220 Humbolt court, Sunnyvale, CA 94089, USA, FriendFinder.com