[c-nsp] Hardware PBR on Sup720/PFC3BXL

[David Sinn]

I've not done VRF Select PBR myself, but it would appear that it was first integrated in 12.2(33)SXH1, so you could be running into a bug, or not totally following the implementation guide as it would appear that you need to give a next hop when using the "set vrf [instance]" term in the route-map:

http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_mltvrf_slct_pbr.html

Hope that helps!

David

On Jan 18, 2010, at 4:14 AM, Robert Hass wrote:

> Hi
> 
> I have to implement some Policy-Based Routing (PBR) route-map's on few
> Catalyst 6500. We currently using Sup720/PFC3BXL with IOS
> 12.2(33)SXH6, but we can migrate to SXI if it helps. Are below PBR
> route-map's are supported in hardware on PFC3B/DFC3B ?
> 
> route-map pbr2 permit 10
> set global
> !
> route-map pbr permit 10
> match ip address 160
> set vrf r2
> !
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 eq 780
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 eq 782
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 eq 787
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 eq 790
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 eq 796
> access-list 160 permit tcp any x.x.0.0 0.0.255.255 range 50000 51000
> 
> Thanks
> Robert
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/