[c-nsp] cisco 6509 rommon mode [SEC=UNCLASSIFIED]

[Cyrill Malevanov]

SUP2 costs $400. So even he doesn't have smartnet, this would be not very expensive.


On Jan 21, 2010, at 5:28 PM, Ulici Alexandru wrote:

> Had the same problem, and the same solution (RMA).
> alex
>> 
>>    0n Wed, Jan 20, 2010 at 11:32:54AM -0500, Kevin Loch wrote:
>> 
>>>> Warning: Rommon NVRAM area is corrupted. Initialize the area to
>> default values
>>>> c6k_sup2 processor with 262144 Kbytes of main memory
>> 
>> I've been bitten by this exact same bug. You have hit a hardware bug.
>> Please see
>> the field notice: http://www.cisco.com/en/US/ts/fn/200/fn27595.html
>> 
>> Had to do an RMA for the SUP to solve this problem (hope you have a
>> support
>> contract in place) :)
>> 
>>  -Alex
>> 
>> IMPORTANT: This email remains the property of the Australian Defence
>> Organisation and is subject to the jurisdiction of section 70 of the
>> CRIMES ACT 1914.  If you have received this email in error, you are
>> requested to contact the sender and delete the email.
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/