[c-nsp] 6509 problem
James Greig
james at mor-pah.net
Fri Jan 22 14:26:56 EST 2010
Hi,
Recently bought a standard 6509 + highspeed fan along with a WS-SUP32-GE-3B
and 2x WS-X6148A-RJ-45. The 6500 boots up fine with the sup32, however,
when it runs a diagnostic on the two switch modules (WS-X6148A-RJ-45) it
fails stating:
*Feb 28 22:29:29.055: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics
detected a Major Error. Please use 'show diagnostic result <target>' to see
test results.
*Feb 28 22:29:29.059: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1:
TestLoopback failed on port(s) 1-48
*Feb 28 22:29:29.987: %OIR-SP-3-LC_FAILURE: Module 1 has Major online
diagnostic failure, Card will be reset to re-run diagnostic. Please check
sup-bootflash diaginfo file for previous detailed diagnostic result.
Both switch modules are reporting the above, any help is really appreciated
on this as i'm stumped.
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
1 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-RJ-45
2 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-RJ-45
5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B
Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
1 001c.582d.0c30 to 001c.582d.0c5f 3.5 8.4(1) 12.2(33)SXI2
PwrDown
2 0007.0e49.c430 to 0007.0e49.c45f 3.5 8.4(1) 12.2(33)SXI2
PwrDown
5 001b.533a.7b80 to 001b.533a.7b8b 4.5 12.2(18r)SX2 12.2(33)SXI2 Ok
Kind Regards
James Greig
More information about the cisco-nsp
mailing list