[c-nsp] 7600 + egress netflow + 12.2(33)SRE

[Cyrill Malevanov]

7600 routers have almost no reason to use ip flow ingress / ip flow egress commands. They use NDE through PFC, because it's hardware architecture is very different from 7200 routers.

On Jan 25, 2010, at 11:59 PM, Atif Sid wrote:

> New code 12.2(33)SRE have removed the command ip flow egress from the
> interfaces.  it shows the command but does not configure it?
> example:
> 
> PE2(config)#int vlan 3500
> PE2(config-if)#ip flow
> PE2(config-if)#ip flow ?
>  egress   Enable outbound NetFlow
>  ingress  Enable inbound NetFlow
> PE2(config-if)#ip flow eg