[c-nsp] [SUMMARY]: 4900M vs. 4503 for core

[Andrew Gabriel]

For pure L2 aggregation HP also has a 24-port fiber switch that is very
reasonably priced. It also has 10 G uplinks that you can use to connect to a
4948 10G switch, which will work out to be fairly cost effective.


Regards,
Andrew Gabriel.




On Fri, Jan 29, 2010 at 11:58 AM, Adam Atkinson <ghira at mistral.co.uk> wrote:

> Mark Tinka wrote:
>
>  We've been down this road before when searching for a 1U Ethernet switch
>> that provides decent fibre-only port density.
>>
>
> Extreme X650?
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

CONFIDENTIALITY
This e-mail message and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail message, you are hereby notified that any dissemination, distribution or copying of this e-mail message, and any attachments thereto, is strictly prohibited.  If you have received this e-mail message in error, please immediately notify the sender and permanently delete the original and any copies of this email and any prints thereof.
ABSENT AN EXPRESS STATEMENT TO THE CONTRARY HEREINABOVE, THIS E-MAIL IS NOT INTENDED AS A SUBSTITUTE FOR A WRITING.  Notwithstanding the Uniform Electronic Transactions Act or the applicability of any other law of similar substance and effect, absent an express statement to the contrary hereinabove, this e-mail message its contents, and any attachments hereto are not intended to represent an offer or acceptance to enter into a contract and are not otherwise intended to bind the sender, Sanmina-SCI Corporation (or any of its subsidiaries), or any other person or entity.