[c-nsp] [rancid] Cisco L2tp class with password and rancid

[Arie Vayner (avayner)]

Alan,

For energywise, I found CSCte69094 which should fix the issue in
12.2(53)SE1...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alan Buxey
Sent: Monday, July 05, 2010 20:49
To: David Freedman
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] [rancid] Cisco L2tp class with password and rancid

Hi,

> > I have an issue when I configure a l2tp-class with a password in it,
every
> > time I do a "sho run" the level 7 encrypted password is shown
differently.
> > When using Rancid for config backups, every time Rancid runs I
receive a
> > complaint my config has "changed".

I've had this issue with several devices and its been fixed by cisco.

recently, however, have had the same with the level 7 password
for energywise.  the 'fix' is to not have it encrypted in the config
and save it as plain text (level 0) - thats not acceptable.  you'll
have to do what i did - reconfigure rancid to ignore that value.


alan
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/