[c-nsp] snmp config in PIX

[Edward Iong]

 Dear All,

 

Thank you for your help. The SNMP is working now. Due to my pix is using 6.3(5) which only the SNMP Version 1 can be used.

 

Thanks,

 

Edward
> From: rwest at zyedge.com
> To: edward_iong_ at hotmail.com; cisco-nsp at puck.nether.net; sunny.ieong at esprit.com
> Subject: RE: [c-nsp] snmp config in PIX
> Date: Tue, 6 Jul 2010 13:44:21 +0000
> 
> 
> 
> > -----Original Message-----
> > Sent: Tuesday, July 06, 2010 5:51 AM
> > To: cisco-nsp at puck.nether.net; sunny.ieong at esprit.com
> > Subject: [c-nsp] snmp config in PIX
> > 
> > 
> > Dear all,
> > 
> > I am trying to set snmp agent in my PIX 506E FW(192.168.1.1). I am not good
> > in PIX FW. The following is my configuration PIX506# sh snmp-server no
> > snmp-server location no snmp-server contact snmp-server community
> > mosnmpcommunity no snmp-server enable traps
> > 
> > After command, I can ping the snmp manager from my PIX506, but I still
> > cannot get anything from my snmp manager(192.168.1.110) which is in the
> > same network.
> > I have also set in switches, and my snmp manager can see the switches.
> > 
> > Could anyone help me on this?
> > 
> 
> I'm not quite sure if you're trying to poll or trap. Either way, the PIX 6.x only support v1 SNMP and most polling or trapping software is going to default to v2c. Try changing and see if it helps. 
> 
> snmp-server host inside x.x.x.x poll
> snmp-server community notsoverypublic
> 
> -ryan
 		 	   		  
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4