[c-nsp] 3750 and L3 service policies

[Ivan]

"The show policy-map interface command is not supported on 3750 and 3560
switches, even though it is allowed to be typed in the CLI."
(https://supportforums.cisco.com/message/545443#545443)

*It is possible to see some statistics using the following commands
	clear mls qos interface statistics
	show mls qos interface <int> statistics
but the output doesn't confirming marking occurring rather just details
the (DSCP) markings on traffic entering and leaving interfaces.

Ivan

> Hi,
>
> We had to deploy some L3 service policies on a WS-C3750E-24TD. After
> the config was put in place we could see it working on the interface,
> but according the the statistics on the input route-map - there was
> nothing matching at all.
> Is that expected? The switch runs only as a L2 switch, except for that
> single access list.
>
> software: 12.2(44)SE1
>
> class-map match-all CLASS_SLAP
>  match access-group name ACL_SLAP
>
> policy-map POLICY_SLAP
>  class CLASS_SLAP
>   police 80000000 128000 exceed-action drop
>
> ip access-list extended ACL_SLAP
>  deny   tcp any eq www any
>  permit ip any any
>
> kind regards
> pshem
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>