[c-nsp] WS-X6148A-GE-45AF is not powering up
Renelson Panosky
panocisco77 at gmail.com
Tue Jun 1 08:18:54 EDT 2010
Hello All
One of my blade is not powering up but i can't remember the command to power
it back up. Can some one please help me ? The sho mod command is below.
#sho mod
Mod Ports Card Type Model Serial
No.
--- ----- -------------------------------------- ------------------
-----------
1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF
SAL1017L82X
2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF
SAD093905SP
3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF
SAD093900TK
4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF
SAL1011FSAE
5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B
SAD0939052K
6 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF
SAL1008ECF3
Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
1 0017.94da.a540 to 0017.94da.a56f 2.4 8.4(1) 8.7(0.22)BUB Ok
2 0015.c649.4c00 to 0015.c649.4c2f 1.2 8.4(1) 8.7(0.22)BUB Ok
3 0015.c649.d300 to 0015.c649.d32f 1.2 8.4(1) 8.7(0.22)BUB Ok
4 0017.0eb2.5680 to 0017.0eb2.56af 2.0 8.4(1) 8.7(0.22)BUB Ok
5 0013.809d.e556 to 0013.809d.e561 4.2 12.2(18r)SX2 12.2(33)SXH6 Ok
6 0017.0eb1.8a80 to 0017.0eb1.8aaf 2.0 8.4(1) 8.7(0.22)BUB
PwrDown
Mod Sub-Module Model Serial Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
1 IEEE Voice Daughter Card WS-F6K-48-AF SAL1005C1WY 2.2 Ok
2 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093903ZR 1.2 Ok
3 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD0938067D 1.2 Ok
4 IEEE Voice Daughter Card WS-F6K-48-AF SAL1010FGJL 2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3B SAD0938037W 2.1 Ok
5 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD093804E3 3.0 Ok
6 IEEE Voice Daughter Card WS-F6K-48-AF SAL1008EB9X 2.0
PwrDown
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Not Applicable
More information about the cisco-nsp
mailing list