[c-nsp] RES: Load Configuration From Flash

[Jeff Fitzwater]

Does that device support the FORMAT command to redo the NVRAM?

Jeff
On Jun 1, 2010, at 10:55 , Mohammad Khalil wrote:

> The issue is that i can start the router and the IOS is loaded successfully 
> when i type anything and save it such as a hostname or interface description and reload the router i find the router back to scratch which means that there is no configuration file saved
> 
> 
> Subject: Re: [c-nsp] RES: Load Configuration From Flash
> From: jfitz at princeton.edu
> Date: Tue, 1 Jun 2010 10:44:20 -0400
> CC: leonardo.souza at nec.com.br; cisco-nsp at puck.nether.net
> To: eng_mssk at hotmail.com
> 
> I am guessing you are in ROM MON mode and need to get the IOS loaded and then the config.
> 
> I believe you need to do...
> 
> boot system flash (any sub device goes here)
> 
> 
> Jeff 
> 
> On Jun 1, 2010, at 09:45 , Mohammad Khalil wrote:
> 
> 
> The current IOS is c2600-advipservicesk9-mz.124-18e.bin
> 
> i tried more than one IOS image and i am not able to find the right image because when i issue the command boot , see the output below
> Router(config)#boot ?
>  bootstrap  Bootstrap image file
>  host       Router-specific config file
>  network    Network-wide config file
>  system     System image file
> 
> Thanks
> 
> Subject: RES: [c-nsp] Load Configuration From Flash
> D! ate: Tue, 1 Jun 2010 10:02:28 -0300
> From: leonardo.souza at nec.com.br
> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> 
> It is supposed to work...
> Did you issue the following command?
> 
> boot config disk0:startup-config nvbypass
> 
> Which version are you using?
> 
> 
> 
> -----Mensagem original-----
> De: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Mohammad Khalil
> Enviada em: terça-feira, 1 de junho de 2010 09:12
> Para: cisco-nsp at puck.nether.net
> Assunto: [c-nsp] Load Configuration From Flash
> 
> 
> hi all 
> i have Cisco 2621XM 
> the NVRAM is corrupted and i want to load the configuration file from flash
> i looked for the command boot config 
> but i cannot find the appropriate image for the router to do this
> 
> Thanks
> 		 	   		  
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> https://signup.live.com/signup.aspx?id=60969
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 			   		  
> _________________________________________________________________
> Hotmail: Trusted email with powerful SPAM protection.
> https://signup.live.com/signup.aspx?id=60969
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> Hotmail: Free, trusted and rich email service. Get it now.