[c-nsp] IPv4 Multicast

[Rens]

Nope it is on a different subinterface:

interface Loopback0
 ip address 172.16.0.1 255.255.255.255
!
interface FastEthernet0/0
 description 3560
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/0.200
 encapsulation dot1Q 200
 ip address 10.0.0.1 255.255.255.0
 ip pim sparse-mode
 ip sap listen
 no snmp trap link-status
!
interface FastEthernet0/0.300
 encapsulation dot1Q 300
 no snmp trap link-status
 no cdp enable
 xconnect 172.16.0.2 300 pw-class L2L-PW
!
interface FastEthernet0/1
 description c1841-BLU
 ip address 192.168.0.1 255.255.255.0
 ip pim sparse-mode
 ip sap listen
 duplex auto
 speed auto

-----Original Message-----
From: Marko Milivojevic [mailto:markom at ipexpert.com] 
Sent: mercredi 2 juin 2010 1:43
To: Rens
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] IPv4 Multicast

On Tue, Jun 1, 2010 at 16:14, Rens <rens at autempspourmoi.be> wrote:
> I have tested this setup with a different 7206VXR running
> c7200-adventerprisek9-mz.124-4.T1.bin and I have the same problem.

Are you trying to run PIM on the same interface that you have xconnect
configured on? Can you please post the relevant configuration?

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert

YES! We include 400 hours of REAL rack
time with our Blended Learning Solution!

Mailto: markom at ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Web: http://www.ipexpert.com/