[c-nsp] NATIVE_VLAN_MISMATCH

[Mark]

or just correct the native vlans?


On 02-Jun-2010, at 8:59 PM, Jan Gregor wrote:

> Made my day :). CCNA, doing it wrong :).
> BTW, letting CDP turned on towards the customer is really the way to get
> your logs pretty large pretty fast when you bump into a bad guy.
> 
> 
> Jan
> 
> On 06/02/2010 06:37 AM, Octavio Alvarez wrote:
>> On Fri, 28 May 2010 16:41:16 -0700, Rick Kunkel <kunkel at w-link.net> wrote:
>> 
>>> I've connected a switch of mine to a provider's switch, and I'm
>>> getting CDP-4-NATIVE_VLAN_MISMATCH warnings...  but everything works
>>> fine.
>>> 
>>> Is this just a harmless warning?  I'm not doing any VLANs with them.
>>> Their connection is going into a 3550 that has just had the nvram
>>> erased and NO setup done, so it's ridiculously stock.
>> 
>> I would try setting both switches to different VTP domains.
>> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/