[c-nsp] Configuration examples for RTBH in both directions

[Ziv Leyes]

As an answer to a previously similar question mail in this list, Steve Bertrand wrote a very nice and useful how-to here:
http://ipv6canada.com/?p=59

Thanks again Steve,
Ziv


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Drew Weaver
Sent: Monday, June 07, 2010 5:02 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Configuration examples for RTBH in both directions

Hi,

Can anyone provide configuration examples for Real Time Black Holing (RTBH) both source and destination, bonus points if it can also add a 'blackhole' community that is sent up to the upstream providers if it is a source address on our network.

Does anyone have any good ideas for the best way to handle this? do you use a small switch/router that can do BGP, or do you use a linux/vyatta router to do the route reflection?

thanks,
-Drew

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************




 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************