[c-nsp] ID Debugs before sending to SYSLOG

[B]

Tom,

You can add the command "service sequence-numbers" to your config. Don't
know if that is what you are looking for. Gives each message a unique ID.

On Mon, Jun 7, 2010 at 12:13 PM, Tom <ww10ww10 at yahoo.com> wrote:

> Hello,
> I was wondering if anyone has a neat way to mark debugs generated by
> routers before they are send to a syslog server? The issue is that
> debugs don't contain a facility or anything like that could ID them.
> When looking over syslog messages it's impossible to filter them out.
>
>  I think there is a way that I could do this with EEM and tcl but just
> wanted to make sure that anyone doesn't have any other better ideas on
> how to filter debugs on a syslog server.
>
> Thanks in advance.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>