[c-nsp] L3VPN over RSVP

[Marko Milivojevic]

On Wed, Jun 9, 2010 at 18:20, Arie Vayner (avayner) <avayner at cisco.com> wrote:
> In older releases, where this command is not available you can apply a
> route-map on the output direction of the BGP session to the RR, match
> the RT of the VRF, and set a different next-hop. It would do the same as
> above but without the custom made command.

It can be done in the inbound direction, too. Couple of weeks ago I
wrote a blog article that tweaks next-hop of the incoming VPNv4 update
as a workaround for broken LSP. The same solution can be used to force
the traffic via TE tunnel. Here is the link:

http://blog.ipexpert.com/2010/05/31/next-hop-in-mpls-vpns/

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert

YES! We include 400 hours of REAL rack
time with our Blended Learning Solution!

Mailto: markom at ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Web: http://www.ipexpert.com/