[c-nsp] bgp 0.0.0.0 in routing table

[Randy]

--- On Thu, 6/10/10, Michael Sprouffske <msprouffske at yahoo.com> wrote:

> From: Michael Sprouffske <msprouffske at yahoo.com>
> Subject: [c-nsp] bgp 0.0.0.0 in routing table
> To: cisco-nsp at puck.nether.net
> Date: Thursday, June 10, 2010, 12:13 PM
> Just curious about this question for
> my exam. The answer says igp and aggregate command.  Just
> wondering why you couldn't manually put that in the table? 
> Might be a dumb question.
> 
> What are the two reasons for the appearance of 0.0.0.0 as
> the next hop for a network in the show ip bgp command
> output? 
> 
1) local prefixes (static, connected...)
2) aggregate of longer prefixes in route table