[c-nsp] CRS-1 MSC utilization

Aaron dudepron at gmail.com
Mon Jun 14 15:47:41 EDT 2010


So you are asking not MSC utilization but interface. There is a SNMP mib you
can use to monitor your interface utilization.

Aaron

On Mon, Jun 14, 2010 at 08:06, bas <kilobit at gmail.com> wrote:

> Hi,
>
> Does anyone know if there is a command to view the utilization of a
> MSC in a CRS?
>
> We are using the 8 port 10GE PLIMs which are 2:1 oversubscribed.
> As we have primarily outbound traffic (hosting) we use half the ports
> for inbound (from servers/DC) and half for outbound (to internet)
> traffic.
> However some ports also have bi-directional traffic.
>
> We currently copy/paste "monitor interface" output to excel and add up
> the values (per localion) every now and then.
> But it would be a lot better if we could check with a CLI command or
> automatically monitor MSC utilization with a SNMP query.
>
> Thanks in advance,
>
> Bas
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list