[c-nsp] ASR 1002 with IOS 12.2(33)XNF1 Percentage based traffic shaping

[krunal shah]

hi,

Does anyone have problem with ASR 1002 in configuring Percentage based
traffic shaping I have following config? Somehow I am not able to attach the
swrvice policy to tunnel interface. CLI throw following error.

"Traffic Shaping feature is not supported in user defined class of parent
level policy"
CEF is enabled globally and I also tried applying service policy after
configuring "qos-preclassify". Is there anything special about ASR 1002 for
traffic shapping configuration?

On physical interface there is no issues in applying this policy-map.

!
class-map match-all Bandwidth_Control_to_Store_CLASS
 match access-group name Bandwidth_Control_to_Store_ACL
!
!
policy-map Bandwidth_Control_to_Store_POLICY
 class Bandwidth_Control_to_Store_CLASS
  shape average percent 50
!
interface Tunnel780
 bandwidth 1500
 ip address 10.56.63.245 255.255.255.252
 ip tcp adjust-mss 1436
 ip ospf cost 50
 keepalive 2 3
 cdp enable
 tunnel source FastEthernet0/0
 tunnel destination 192.168.22.206
end
!
ip access-list extended Bandwith_Control_to_Store_ACL
 permit ip host 172.18.128.242 any


interface FastEthernet0/2/0
 ip address 192.168.16.2 255.255.255.252
 speed 100
 no negotiation auto
end

Krunal