[c-nsp] BGP routing table !!

[Ziv Leyes]

Can you post your BGP settings with your peer?
Do you have a "maximum-prefix" setting on your neighbor peer?

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Raheel Muhammad
Sent: Thursday, June 17, 2010 2:09 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] BGP routing table !!

Hi guys,

Might be a basic question but i couldnt find anything, i have cisco 7606 i
just had a new peering with our upstream provider, but router rebooted when
routes reached 300k, router is not running anything else as well. Any idea?

Cisco CISCO7606-S (M8500) processor (revision 1.0) with 851968K/65536K bytes
of memory.
Processor board ID FOX1310G2VB
 BASEBOARD: RSP720
 CPU: MPC8548_E, Version: 2.0, (0x80390020)
 CORE: E500, Version: 2.0, (0x80210020)
 CPU:1200MHz, CCB:400MHz, DDR:200MHz,
 L1:    D-cache 32 kB enabled
        I-cache 32 kB enabled

Regards
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************




 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************