[c-nsp] Continous BGP session resets on SRD3
Tima Maryin
tima at transtelecom.net
Fri Jun 18 08:41:05 EDT 2010
I've been told by TAC that this problem caused by CSCta33973
Rodney Dunn wrote:
> We are working to get some clarification on this.
>
> In the interim...
>
> Can anyone prove they saw this when either:
>
> a) The upstream speaker did not have the AS Path limit configured to
> something lower (say less than 200)?
>
> b) The upstream speaker was running with code *newer* than one of these:
>
> 15.1(01.07.01)PIA14 15.1(01.05.01)PIA13 15.1(01)XB 15.0(01.01)SID
> 15.0(01)M 12.4(24.06.06)PIL12 12.4(24.06.05)PIB12 12.4(24.06)PI11l
> 12.2(33.01.21)MCP05 12.2(33)ZI 12.2(33)XNE 12.2(33)SXI02
> 12.2(32.08.17)REC186 12.2(32.08.15)YCA273.10 12.2(32.08.11)XJC273.11
> 12.2(32.08.11)SX277 12.2(32.08.06)YCA246.10 12.2(32.08.01)YCA273.15
> 12.0(32)SY10
>
> From what Shimol and I appear to have gleaned so far it's an issue
> between a 4byte AS (new) speaker and and non 4 byte (old) speaker *and*
> the 4byte AS (new) upstream speaker is on a version of code older than
> one of the ones above.
>
> Can folks confirm/deny if their deployment where they saw this either
> did or did not match those conditions above?
>
> Read it carefully as it can be tricky.
>
> Thanks,
> Rodney
More information about the cisco-nsp
mailing list