[c-nsp] Recieving Dying Gasp notifications

[Wyatt Mattias Gyllenvarg]

Heir heir

This is a feature I would like too see. But via syslog, I dont know if
there is enough running time for the switch too create a packet and
send it before the psu is drained.

Otherwise I guess a regular DG that could be logged if enabled would
work aswell.

This would save alot of time when trying to narrow down a link down
due too powerloss.

//Wyatt Gyllenvarg
Bredband2
Sweden


2010/6/17 Atif Sid <guru6111 at gmail.com>:
> http://www.cisco.com/en/US/products/ps9637/index.html
>
> ME3400 series support the feature.
>
> On Tue, Jun 15, 2010 at 12:27 PM, Kaegler, Mike <KaeglerM at tessco.com> wrote:
>
>> I have a few remote sites which can be prone to power failures. For
>> various reasons, implementing UPSs with management cards is not suitable
>> and/or desirable.
>>
>> The remote equipment all supports Dying Gasp, however, but I cannot seem
>> to find a way to make my 7200s, 3800s, or 2600s to receive the DG
>> notifications. Google seems to indicate that only the CRS-1 will do it.
>>
>> This seems a pretty simple & low-cost feature... is there truly no Cisco
>> support for receiving DG on sub-million-dollar routers?
>> -porkchop
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>