[c-nsp] How to find the root cause of packet loss
tkapela at gmail.com
tkapela at gmail.com
Fri Jun 18 12:46:55 EDT 2010
Toss a pair of hosts, one at gig, one at faste, on the 2970 -- then run iperf -c -P 50 / -s on either host, and tell *us* what you see for discards out the slower of the two interfaces.
If you've got the gear, it should seem that the best information might be from actual testing vs non-existent specs.
------Original Message------
From: Sascha Pollok
Sender: cisco-nsp-bounces at puck.nether.net
To: Peter Rathlev
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] How to find the root cause of packet loss
Sent: Jun 18, 2010 12:34 PM
>> Getting output drops and packet loss on Catalyst WS-C2960G-48TC-L.
>
> Someone should start selling T-shirts with a pun on that. :-)
Any idea how the EOSed 2970 performs in terms of buffers and
bursts? I have some of those in stock and wondering where to
put them next.
-Sascha
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
-Tk
More information about the cisco-nsp
mailing list